HiQ Parts Magnet Setter 2 for 3.0mm Magnets (1 piece) Hobby Material MGST-C30

HiQ Parts Magnet Setter 2 for 3.0mm Magnets (1 piece) Hobby Material MGST-C30

A must-have item for magnet attachment and removal work that becomes a magnet holder just by sticking it on

Magnet Setter 2 is a magnetic seal that can be used to receive neodymium magnets.
It is a soft material that fits curved surfaces and is thin, at approximately 0.2 mm, so it can be used to create magnet holders in small parts where it is difficult to embed magnets.

Points to note for circular cut type
Due to the punching process, it is slightly curved in an arch shape.
When applying, press firmly to ensure the center is tightly attached.
It will adhere well if you press it with a round part such as the back end of a ballpoint pen.

Note
If you use model enamel paints for inking with a solvent, the adhesive strength may decrease. Do not soak the paint in the solvent for a long time.
If the adhesive strength is insufficient, reinforce it with instant glue or epoxy clear adhesive.
Since this is cut metal, please be careful not to injure your fingers or other parts of your body on the edges.

Sheet size: Width 49mm, depth 40mm, thickness 0.2mm
Sticker size (1 sheet): diameter 29 mm, thickness 0.2 mm

*This product is a hobby material. Please prepare tools, adhesives, etc. separately.

*Items other than this product (adhesives, paint, tools, batteries, etc.) are not included.